source http:// www.honda4fun.com/
normal bulb 12 v with two crocodiles.
use:
with a key 23-turn clockwise to the maximum opening of the check points with a feeler gauge, the distance is 0.3 mm to 0.4 mm.
connect a terminal to ground and the other on the finger moving the needle.
Switch On as the electrical contact when the bike starts to move ...
continuing to turn (follow the arrow) align riferimenfo F (cylinders 1-4) with the notch down.
If the bulb lights up in his correspondence is all OK.
Otherwise, unscrew the plate and rotate one way or another to obtain the exact alignment and the corresponding power of the bulb
Repeat on the other pair of pins. Align F (cylinders 2-3)
To adjust, unscrew the small plate headshell.
0 comments:
Post a Comment